StarHub ABQ-1H57-SCV, User Manual

Page: 22 / 33

19
Option 3: Connection via AV cables to VCR/DVD-R
Please refer to the steps in the following diagram to connect your digital set-top box,
VCR/DVD-R and TV unit. This connection will allow three different recording scenarios as
shown in the
Recording section.
IMPORTANT
Only 1 set of AV cables and 1 set of RF cables are included during installation.
VCR/DVD-R must be tuned to all free-to-air frequencies for the recording function to work. For VCR/DVD-R tuning
procedures, refer to the VCR/DVD-R manual.
TV must be tuned to all free-to-air frequencies so that you can watch free-to-air channels on your TV while recording a
StarHub TV channel on your VCR/DVD-R.
CABLE IN TV OUT
Digital set-top box
(Back)
ETHERNET
POWER CABLE STEREO AUDIO
RIGHT LEFT
VIDEO
Red White Yellow
AV 1
AV 2
RF IN RF OUT
VCR/DVD-R
(Back)
To TV AV In
POWER CABLE
STEREO AUDIO
RIGHT LEFT
VIDEO
Red White Yellow
To TV
AV In
To TV
RF In
2
3
4
6
5
1
Connect RF cable from VCR/DVD-R RF Out to TV RF In.
Connect RF cable
from the cable TV
point to the digital
set-top box Cable In.
Connect AV cable from
digital set-top box AV Out
to TV AV In.
Connect AV cable from
digital set-top box AV Out
to VCR/DVD-R AV In.
Connect AV cable from
VCR/DVD-R AV Out to
another TV AV In.
Connect the
RF cable from the
digital set-top box TV Out
to VCR/DVD-R RF In.
RF IN
StarHub
CableTV point
HDMI/DVI HDMI/DVI
TV
(Back)
RF IN
R
Red
L
White
Video Video STEREO AUDIO STEREO AUDIO
Video
Yellow
Y
Green
Pb
Blue
Pr
Red
TV
(Back)
Component AV
RF IN
Y
Green
Pb
Blue
Pr
Red
R
Red
L
White
Video STEREO AUDIO
Video
Yellow
Video
Yellow
L
White
R
Red
Video
Yellow L
White
Component
R
Red
Technical Information
Installation Guide - Digital Set-top Box (ABQ-1H57-SCV)
AV