2
POWER On LED Indicator
Green = ON
Red
= Standby
Flashing = IR Transmission in progress
Front Panel Buttons
ONLINE
Green = IP address
assigned by
external
cable modem
Pressing button alternates between ON and STANDBY modes
POWER ON/OFF
OK
Confirmation of selection
BACK
Moves back one level in MENU system
MENU
Enters and exits MENU system
CHANNEL UP/DOWN
Channel change or navigates when in MENU system
VOLUME UP/DOWN
Volume change or navigates when in MENU system
Smart Card Slot
Graphics
IMPORTANT
• When you switch off your television set, you should always put the digital set-top box on
stand-by mode for regular software updates.
• Always place your digital set-top box on a smooth, flat surface.
• Air should circulate freely under and around the box to prevent overheating. Do not place
anything on top of your digital set-top box.
• Do not place the digital set-top box near wet or moist areas.
• If the display flickers and the digital set-top box does not change channels, unplug it from
the wall cable point and wait at least ten seconds before plugging it back again. Press the
ON/OFF button to reactivate the digital set-top box and try again.
• Do not dismantle the digital set-top box to attempt servicing it on your own. Always refer to
our Customer Care at 1633.
Do not remove or deface the bar code label pasted on the digital set-top box.
Digital Set-top Box (DCI15SHB)
Getting Started
Summary of Contents for ABQ-1H57-SCV
Page 1: ......
