IGNITION SAFETY INFORMATION
We recommend that before you install your Fire Pit you familiarize yourself with the control valve
layout. This will help you to be confident operating the Fire Pit when fully installed (see figures
below for typical control positions).
FOR YOUR SAFETY, READ BEFORE LIGHTING
CAUTION
IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT
CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
WARNING
BEFORE LIGHTING
, smell all around the Outdoor
Fire Pit area for gas. Be sure to smell next to the
floor because some gas is heavier than air and
will settle on the floor. IF YOU SMELL GAS FOLLOW
THE INSTRUCTIONS ON PAGE 1.
WARNING
DO NOT
use this appliance if any part has been
under water. Immediately call a qualified,
professional service technician to inspect the
Outdoor Fire Pit and to replace any part of the
control system and any gas control that has been
under water.
OPERATING INSTRUCTIONS
MANUAL MATCH LIT SYSTEMS ONLY
READ IGNITION SAFETY INFORMATION BEFORE LIGHTING
IGNITING THE FIRE PIT
1.
Enter the included valve key into the key valve
opening
2.
Using a long safety lighter, hold an open flame above
the outside edge of the burner ring.
3.
Slowly turn the valve key towards the “ON” position.
4.
Once fire
burner
is lit, remove safety lighter and turn
key
valve up or down for desired flame height.
SHUTTING OFF THE FIRE PIT
1. To turn off, insert valve key into the key valve opening
and rotate to the off position.
CAUTION
DO NOT turn the main gas valve knob to the “ON” position FOR 5 MINUTES
after shutting the unit off.
- 8 -
COPYRIGHT ©
2020
, STARFIRE DIRECT, ALL RIGHTS RESERVED.
FIG. 8-1