4. System Login
You can log into the system to perform configuration and administration tasks using any of the three following methods:
A. The LCD control panel mounted on the device.
B. Through a RS232 connection.
C. Through the LAN Port using the web GUI. [ Please refer to Step 4.3 ]
Once the administrator has logged into the system through one of these three methods they can configure the disk array
settings.
The default login password is : 0000
4.1 LCD control panel login
The LCD control panel mounted on the SR5-WBS2 is the primary user interface. You can manage and setup the entire
system using the LCD display and the four control buttons below it without using any other hardware or software. The
LCD panel can display all system information, status and settings.
Function Button Description
Button
Function
Up
Move up / Right Select
Down
Move Down / Left Select
Enter
Confirm Selection
ESC
Cancel Selection or Back
You can use the “Up” and “Down” function buttons to select or browse the available functions, use ENTER to select or
access the relevant settings, and the ESC button to exit the settings or return to the next higher level directory.
SOHORAID SR5 Series User Manual
4
