5. System Management
5.1 System Architecture
Quick Volume and RAID Set Setup
>
RAID Set Functions
>
Create RAID Set
>
Delete RAID Set
>
Expand RAID Set
>
Activate RAID Set
>
Create Hot Spare
>
Delete Hot Spare
>
Rescue RAID Set
Volume Set Functions
>
Create Volume Set
>
Modify Volume Set
>
Check Volume Set
>
Stop Volume Set Check
Physical Drive
>
Create Pass-Through
>
Modify Pass-Through
>
Delete Pass-Through
>
Identify Drive
>
Identify Drive
System Controls
>
System Config
>
EtherNet Config
>
Alert By Mail Config
>
SNMP Configuration
>
NTP Configuration
>
View Events/Mute Beeper
>
Generate Test Event
>
Clear Event Buffer
>
Modify Password
>
Upgrade Firmware
>
Restart Controller
>
Raid Set Hierarchy
Information
>
System information
>
Hardware Monitor
When your computer has booted, your operating system should recognize the RAID volume automatically.
After the volume has been successfully recognized, please follow the formatting of hard drive instructions
given by the operating system to format the drive volume of your preference. Once the formatting has been
completed, the RAID system is ready for use.
Note :
The actual storage capacities may differ from the stated capacities on the hard drives once the
drives have been formatted.
SOHORAID SR5 Series User Manual
10
