Starcraft STARFLYER 2015, User Manual

Page: 86 / 152

SECTION 4 – TOWING & SET-UP STARCRAFT TOWABLE
4-36 SCT

NOTE: The screen room is designed with excess fabric at the bottom to aid in
water run-off. Make sure the bottom is lying flat, away from the screen room.
Refer to “Caring for Your Canopy” on the canopy set-up sheet for details on
preventing damage from wind and heavy rain.
Guide to Screen Room Care and Usage
Care should be taken when setting up and taking down screen room to avoid tears
and cuts. When putting away the screen room, the curtains should be in the down
position and secured to the bottom with their strings.
1. Wash off any droppings or foreign matter from the trees with clear water, and
keep vinyl clean when putting away.
2. Do not roll stakes or hardware with the screen room.
3. Never roll vinyl screen room up wet for any extended period of time.
4.
If mildew is apparent, it should be treated promptly with a light solution of
Naphtha soap and water. A soft brush or cloth is recommended for cleaning
vinyl. Lysol spray is a good option as well.
Fiberglass Screening
Fiberglass screening should be loosely folded, not crushed, when opening and
putting away screen room. Do not allow poles and stakes to punch holes in the
screen.
Folding the Screen Room for Storage:
1. Lay the screen room out flat. A grassy area or clean floor is suggested.
2. Square the screen room up and fold in the wings.
3. Roll approximately 18” from both ends towards center (Fig. 3a). Fold in
thirds (Fig. 3b) and store in the bag.
Maintenance
Care should be taken when setting up and putting the screen room away to avoid
tears and cuts. When putting away the screen room, the curtains should be in the
down position and secured to the bottom with their strings.
•
Wash off any droppings or foreign matter from trees with clear water and keep
the vinyl clean when putting away.
•
DO not roll stakes or hardware with the screen room.
•
Never roll the vinyl screen room up wet for any extended period of time.
•
If mildew is apparent, it should be treated promptly with a light solution of
soap and water. A soft brush or cloth is recommended for cleaning vinyl.
3
1
4
2
Fig. 3a
Fig. 3b