9 - PROBLEMS: POSSIBLE CAUSES AND SOLUTIONS
10 - MAINTENANCE
The Tornado 600MD requires a certain level of care: adequate
maintenance, appropriate adjustments and proper storage after the job. These are
factors which will contribute to the durability of the implement and its proper
functioning.
PROBLEMS
CAUSES
SOLUTIONS
The scale opening is not
matching with the rate
adjustment disc.
Adjustments not to
table application
settings.
product
Excessive play on the tractor’s
internal hydraulic system arms. Stabilize the side arms.
Foreign objects inside the tank.
Consult the tables and adjust
according to specifications
listed for the product.
Foreign objects inside the
reservoir impeding the
product output.
There is product built-up
at the product exit due
to excisse humidity. .
Adjust the flow rate;
see item 6.3.1 page. 12.
Remove the object, opening the
product path exit.
Implement not leveled.
PTO rpms not at
540 rpm.
Drive-shaft u-joints loose
due to excessive ware.
Replace the worn u-joints.
Remove foreign objects.
Adjust the PTO rpms to 540 rpm.
Level the implement;
see item 6.1, page 09.
No product
output, or
not continues.
Poor cross-
distribution,
in relationship
to the travel
of the machine.
Vibrations or
excessive
noise.
Use a drier product. In the case of
moisture absorbant products, you can
add up to 10% of the quantity in
hydrated lime.
If this does not help, halt the job so as
to not compromise the quality of the
of the application.
Use the Christmas Tree mixer.
30