-16-
(REFER TO LIGHT WIRE DIAGRAM ON NEXT PAGE, AS WELL AS TO WIRE SIZE TABLE ON
PAGE 11 FOR PROPER WIRE SIZES!)
The electrical connections for input power, slide switch outputs, and the push button
outputs are made to the control box (amplifier) using terminal blocks
(top diagram
above)
.
Input Power:
(Left Terminal Block)
C12VDC to the 3 large barrier
style terminals. When controlling lights with a large amount
of current (>15A) power should be supplied to all three
inputs.
Slide Switch Outputs:
(Center Terminal Block)
Connect the lights that you wish to
activate in the corresponding slide switch positions to the
L1, L2, and L3 outputs (20A max each).
(Note: the second
slide switch position activates both L1 and L2 and the third
slide switch position activates L1, L2, and L3)
.
Push Button Outputs:
(Right Terminal Block)
Connect the lights that you wish to
activate with corresponding pushbutton switches S1-S4 to
the S1-S4 outputs (20A max each).
S5 Output:
Push Button S5 switches low current power (2A or less) to the
Orange wire in the wiring harness. It has an in-line 2A fuse.
Typically the horn ring transfer relay is connected to this
switch. This output should be connected to an external relay
if more than 2 amps is required.
MAN
PHSR
WARN
HF
HORN
LRCO
WAIL
YELP
RADIO
S1
S2
S3
S4
S5
Control Head
OFF L1 L1 & L2 L1, L2, & L3
1
2
3
Top View
(Cover Removed)
(Electrical Connections CONT’D)
INPUT POWER AND SWITCH OUTPUT CONNECTIONS
Side View
Input Power
Slide Switch
Outputs
Push Button
Outputs
