-6-
- Auxillary control
- 8 Second (S4)
- Momentary (S3)
- Normally closed contact (S3)
- Hands Free on start up
- Horn Ring Transfer on start up
- Audible beep disable
(Installer Selectable Options CONT’D)
CONTROL HEAD OPTION JUMPERS
Seven jumpers located inside the control head can be used to select various
options. Review the chart below to determine if you want to change any of the
default settings.
Jumper
Standard Setting
(jumper on both pins)
Optional Setting
(jumper only on one pin)
8 Second (S4)
Push button S4 is a standard
ON/OFF button.
S4 used for Gun Lock - Stays
activated for only 8 seconds when
pressed.
Auxiliary Control
(
Horn vs. Manual)
The green auxiliary (AUX) wire in
the siren amplifier harness is
connected to the vehicle horn
ring, and activates the siren’s AIR
HORN for all siren modes except
Hands Free (HF) mode.
AUX wire duplicates the function of
the MAN push button instead of the
HORN.
Momentary (S3)
Push button S3 is a standard
ON/OFF button.
S3 becomes a momentary switch,
thus only being active while being
held in.
Normally Closed
Contact (S3)
Push button S3 is normally an open
contact (OFF), that closes when
pressed (ON).
S3 becomes a normally closed
contact (ON) that opens (OFF) when
pressed.
S3 Auto Activate
S3 not affected by slide switch.
S3 automatically activates (ON)
when the slide switch is in positions L2
& L3 and turns off when the switch is
moved back to L1 or OFF.
Please note: Only the S3 button can
be programmed with this option. It is
not available for any of the other
buttons.
Hands Free
On Start-Up
Siren in Standby mode when
powered up.
Siren in Hands Free Mode when
powered up.
Horn Ring Transfer
On Start-Up
If you connect the Horn Ring
Transfer option, it is OFF when the
siren is powered up. Pressing push
button (S5) automatically
activates the HRT option.
HRT is ON when the siren is powered
up. Pressing S5 will deactivate the
HRT option.
Audible Beep
Disable
An audible beep is heard when
the buttons in the control head
are pressed.
No beep when the buttons in the
control head are pressed.
