-2-
Installation Notes
Proper installation of the unit is essential for years of safe, reliable operation.
Please
read all instructions before installing the unit.
Failure to follow these instructions can
cause serious damage to the unit or vehicle and may void warranties.
Qualifications -
The installer must have a firm knowledge of basic electricity, vehicle
electrical systems, and emergency equipment.
Keep These Instructions
- Keep these instructions in a safe place for future reference.
Advise the vehicle operator of the location.
Contents should include:
1 - Remote Control Head
1 - Amplifier and Light Control Box
1 - Amplifier Wire Harness with Connector
1 - 25’ Amplifier Communication Cable
(6-wire telephone style cable)
1 - Mounting Hardware
1 - Label Set
1 – RFI Filter
1 - Installation and Operating Instructions
1 - “U” Bracket
(not included with -F: flange mount units)
1 – TDC850 Arrow Stick Control Box
(LCS850 models only)
1 - Arrow Stick Communication Cable
(telephone style cable) (LCS850 models only)
1 - Communication Cable Splitter
(LCS850 models only)
1 – 12” Communication Cable
(LCS850 models only)
Installer Selectable Options
The LCS800 and LCS850 have several options that can be selected during
installation. Jumpers and DIP switches on the printed circuit board inside the
amplifier case, inside the control head, and inside the arrow stick control box
(LCS850 only) allow the installer to select these various options.
These options should
be set before installation of the unit.
Siren Option DIP Switches (located in the amplifier case):
•
Auxiliary input polarity
•
Park Kill input polarity
•
Two-tone replacement of Phaser tone
•
Phaser Disable
•
Slide Switch Pursuit Disable
Control Head Option Jumpers (located inside the control head)
•
Auxiliary control (Manual vs. Horn)
•
8 second timed gun lock release (S4)
•
Momentary replacement of lock-on/lock-off switch operation (S3)
•
Normally closed contact replacement of normally open (S3)
•
Activate Hands Free on start-up
•
Activate Horn Ring Transfer on start-up
•
Audible beep disable
•
S3 Auto Activate on Position L2 & L3 of Slide Switch
