13
INSTALLATION OVEN ASSEMBLY
CONVEYOR INSTALLATION
Conveyor installation can only be installed from the control panel/drive motor side. This needs
to be removed when cleaning the cooking chamber and removing the Nozzel Finger Assembly
for disassembly & cleaning.
ALLOW THE OVEN TO COOL BEFORE INSTALLING OR REMOVING THE CONVEYOR
ASSEMBLY.
1. With Nozzel Finger Assemblies in position, place the Conveyor Guides on its mounting
studs located at the opening at each end of the cooking chamber.
2. Open the conveyor assembly, pull on the conveyor belt making sure it moves freely
without obstruction.
3. With assistance, lift the conveyor and slide it along the Conveyor Guides into position from
the drive motor side, be certain the crumb tray brackets are on the outside of the oven,
and the Drive Collar is on the control panel side as shown below.
4. Once the conveyor assembly is installed, slide the Drive Collar over the Drive Cog to sync
the conveyor with the drive motor.
Drive Collar
Drive Cog
IL1185
IL1186
Conveyor Belt
not shown
Crumb Tray
Bracket
Conveyor
Guide
Conveyor
CAUTION
Summary of Contents for Ultra-max UM3240
Page 27: ......
