background image

23

REGULATORY  INFORMATION

This section provides regulatory and safety information 

pertaining to the product

FCC AND OTHER DOMESTIC  

 REGULATIONS

This product has been tested and found to comply 

with the limits for a Class A digital device, pursuant to 

Part 15 of FCC rules. Under FCC guidelines, operation 

is subject to the following two guidelines: 

1.  This device may not cause harmful interference, and

2.  This device must accept any interference received,  
 

including interference that may cause undesired  

 operation.

The product generates and uses radio frequency 

energy. If the product is not installed and used in 

accordance with the instructions provided in the own-

er’s manual, interference with radio communications 

may occur. Likewise, if unapproved accessories are 

installed, interference with radio communications may 

occur. The intent of the FCC class A limit is to provide 

reasonable protection against harmful interference 

in a commercial installation. However, there is no 

guarantee that interference may not occur in a specific 

installation. In the event that interference is experi-

enced, turn off the unit to verify that it is the source. If 

the interference clears with the unit off, then try each 

of the following measures and combinations thereof:

 

Reorient or relocate the machine.

 

Reorient or relocate the receiving antenna for your 

 

television, radio or VCR.

 

If using the wall outlet option, connect the unit to a 

 

different power outlet.

 

Contact Product Support, your authorized dealer, or a  

 

qualified radio/television technician for help.  This product  

 

has also been tested to meet the following standards:

 

UL 1647 (1997) Motor Operated Massage and Exercise  

 Machines

CANADIAN DOC AND OTHER 

REGULATIONS

This class A digital apparatus meets all requirements 

of the Canadian Interference Causing Equipment 

Regulations. This product has also been tested to meet 

the following standards:

 

CSA C22.2 No 0-M91 General Requirements

 

CSA C22.2 No. 68-92 Motor Operated Appliances

EUROPEAN APPLICATIONS

This product has been tested to the following 

standards:

EN 60335-1: 

1995 

Safety of household and similar 

 

electrical appliances Part 1: General  

 requirements

EN 61000-6-1: 

2001 

EMC Generic standards - Immunity for  

 

residential, commercial and 

 

light-industrial environments

EN 61000-6-3: 

2001 

EMC Generic standards - Emissions  

 

standard for residential, commercial and  

 

light-industrial environments

EN 957-1 

Safety of Machinery

EN 957-8 

Stationary Training Equipment - Part  

 

8: Steppers, Stairclimbers and 

 

Climbers- Additional Specification 

 

safety requirements and test methods

OTHER

ASTM 2776-10 

Standard Specification for fitness 

 Equipment

Summary of Contents for 8-Series



























Reviews: