Platino User Manual
Revision 1.1
Last modified: 13 March, 2015
STAR Systems International Limited
Unit A01, 24/F, Gold King Industrial Building
35-41 Tai Lin Pai Road, Kwai Chung
New Territories, Hong Kong SAR
Tel: +852-3691-9925
www.star-int.net
Page
6
Writing Data to Tag
Write Tag mode allow user to write data to different memory bank
of a specific tag.
Target EPC
User need to input a Target EPC through one of the following
methods:
1.
Press F1 in Write Tag mode to read a new tag. The tag’s EPC will
be displayed in the Target EPC field.
2.
Read a tag in Read Single Tag mode, then press F2 to pass the
EPC of that tag to Write Tag mode
3.
Read tags in Read Multiple Tag mode, use UP or DOWN button
to select one of the tag, then press F2 to pass the EPC of that tag
to Write Tag mode
4.
Manually input the Target EPC using the keyboard
Memory Bank
Once a target EPC is established, user can choose among the
following field to write
1.
Kill Password
2.
Access Password
3.
EPC
4.
TID (not available)
5.
User
Start Pointer
The start position of memory bank to write. Each pointer represent 16 bit (4
hexadecimal word) of data. Please note that Point 0 of EPC (checksum) is not
available for writing.
