Platino User Manual
Revision 1.1
Last modified: 13 March, 2015
STAR Systems International Limited
Unit A01, 24/F, Gold King Industrial Building
35-41 Tai Lin Pai Road, Kwai Chung
New Territories, Hong Kong SAR
Tel: +852-3691-9925
www.star-int.net
Page
16
Parameter Configuration
Through the USB port, you can also configure the following parameters of the reader
by accessing
SysPar.ini
located in the
Config
folder
Sample content of SysPar.ini
Data Structure
[SerialNo],[WiFi/BT Mode]
SerialNo
defines the Serial Number attached at the end of every record. The default
serial number is PlatinoXXXXXX, but you may change the serial number to your own
needs.
WiFi/BT Mode
defines if the unit is operating in WiFi or BT Mode
1 = BT Mode
2 = WiFi Mode
NOTE
: After changing the parameters in SysPar.ini, please save the setting in the file
and reboot the reader for the settings to take effect
