Platino User Manual
Revision 1.1
Last modified: 13 March, 2015
STAR Systems International Limited
Unit A01, 24/F, Gold King Industrial Building
35-41 Tai Lin Pai Road, Kwai Chung
New Territories, Hong Kong SAR
Tel: +852-3691-9925
www.star-int.net
Page
11
Reader Setting
Press the SETTING button in most of the read mode will bring up the setting page
Buzzer
Turn on/off the buzzer which make sound when a tag is read or
button is pressed
Power
Conducted power of the reader to read RFID tags. Range from
10-30 dBm. Please note that user will need to press the READ
button to confirm the change for power setting. Higher power
may result in better read/write performance in exchange of
higher power consumption.
Data Mode
External data connection for Platino. User can choose from the follow modes
1.
USB
Allow Platino to be connected as a USB memory device from a PC. User can
extract the read data from the reader in this mode. There are also specific
parameter that can only be changed in the USB mode, please refer to “Parameter
Configuration” section for more detail.
Please note that after USB mode is selected, Platino will not be able to store tag
read data into the memory anymore. To restore saving tag data to memory in
Read Single Tag, Read Multiple Tag and Read Barcode mode, user has to power
OFF the reader and power ON again to restore the connectivity.
2.
Serial
Allow Platino to be connected as a COM port device from a PC. User can re-sync
the time of Platino and send serial command to Platino for future functions
