Platino User Manual
Revision 1.1
Last modified: 13 March, 2015
STAR Systems International Limited
Unit A01, 24/F, Gold King Industrial Building
35-41 Tai Lin Pai Road, Kwai Chung
New Territories, Hong Kong SAR
Tel: +852-3691-9925
www.star-int.net
Page
10
Reading Barcode
Read Barcode mode allow user to read 1D barcode using the scanner below the
antenna.
Press and hold the READ button to start reading tags. Any barcode
that is read will generate and new entry on the screen with the
barcode data. The total number of distinct barcode is shown at the
bottom of the screen.
Maximum of 9 barcode data can be displayed simultaneously on the
screen, user can press the UP or DOWN button to go through the
barcode list and view the barcode in the next page (e.g. if a total
number of 27 barcode are read, there will be 3 pages of data
available).
Press F1 to save the data into BARCODE.TXT in the reader memory. Please refer to the
Collecting Data section of this manual for more information. The barcode list on the
screen will be cleared afterwards.
If user selected one of the tag with UP or DOWN button, pressing F2 will pass the
selected barcode data to the WRITE TAG mode in the “Write Data” field so user can
write the content into the tag.
Press F3 to clear the barcode list on screen.
