25
as followings.
b) Click “Program Receiver”, it will show as followings, select your “Serial
Port” and Set Baud Rate to 115200.
c) Set correct parameters in the receiver.
Band
: <All> C and Ku band, <C_Band> Only receiver C Band data,
<Ku_Band> Only receiver Ku Band data.
Source
: <All> (TV and Radio data), <TV> Only TV no radio,
<Radio>Only Radio no TV
Channel Type
: <All> FTA and Scrambled channels. <FTA>Only FTA
channels, <CAS>Only Scrambled channels.
Only Transponder
: <NO> Transponder and channel list, <YES>Only
Transponder list.
Del Exist Data
: <YES> Delete the only data and replace them with SDX
data, <NO>Append the SDX data to the end. Note the receiver 100 satellites,
4000 transponders and 6500 channels.
After setting your wanted parameters, press OK then it will show the
message “Connecting…”, then click “Program Receiver”, it will show “Please
wait…” in the Receiver if connected, if not connected, please click “Abort
Programming” then click “Program Receiver” again. After finishing, it will
Summary of Contents for SR-X1200D
Page 6: ...6...
Page 32: ...32 Specification...
