star sat SR-X1200D, User Manual

Page: 14 / 35

14
pre-stored satellite list, you can select satellite by UP/DOWN button, press
OK to mark the satellite.
A: Antenna setup
After marking the satellite, press right button on RCU and move to the
antenna setting, here to setup the correct LNB frequency, switch type (port
1…port 4, burst A, burst B, Auto), if using motor must setup DiSEqC 1.2 or
USALS first.
B: LNB frequency and power
Here you need to check the LNB frequency according to your antenna, set
the correct frequency or define yourself, and keep LNB power to be 13V/18V.
C: Transponder list
If you change the satellite, the transponder will be changed automatically.
You will find the transponder list of selected satellite here by pressing OK.