30
6. Software upgrade
:
a) Connect your receiver and PC with a twisted RS232C cable(pin-2 to
pin-3,pin-3 to pin-2,pin-5 to pin-5).
b) Turn on the receiver and press "POWER" key to make it standby.
c) Run the update tool on your PC, Select the <Download software>,
and select the software file (.bin file), Set the correct serial port,
then click <Start>, upgrade will begin.
d) After finishing, it will display "-End", then disconnect twist RS-232C
cable and restart it.
7. Additional Information
7.1 Problem Solving
You might meet abnormal working of this STB with various reasons, check
the following which may help you.
Summary of Contents for SR-X1200D
Page 6: ...6...
Page 32: ...32 Specification...
