9-2
A
B
C
D
E
F
G
H
I
J
K
L
M
N
9-3
Precautions Concerning Safety
To use this printer safely, you must carefully observe the contents described in the specifications manual and the following
precautions.
Also, we accept absolutely no responsibility for any fires or damages caused by any other type of use of the apparatus.
During or after printing, the surfaces of the thermal head and motor are extremely hot. Do not touch
them directly with your hands.
Do not touch the gears or rotating parts while the printer unit is operating.
Be very careful because there is the possibility of injury by handling the edges of the printer mechanism
(particularly the metal parts).
The yellow caution seal affixed to the top of the printer mechanism base indicates that the thermal head
is extremely hot while printing or immediately thereafter and therefore dangerous. Absolutely never
touch them directly with your hands. The auto-cutter particularly is also extremely dangerous when it is
operating, so absolutely never put your fingers in or near the auto-cutter blades or paper discharge
outlet.
When performing maintenance on the printer mechanism, always unplug the power from its outlet
before starting your work.
Absolutely never apply a voltage that exceeds the maximum rating to the power connector.
The environment for use must be within the ranges specified in the environment specifications.
Do not drop foreign matter with electrical conductivity, such as paper clips, onto the PCB.
Do not disassemble or modify the printer.
Absolutely never place the printer in an unstable location.
Never place the printer in a highly humid or dusty environment because there is the danger of printer
failure, fire or electrical shocks.
Never place objects or sit on the printer.
When not using the printer for an extended period of time, always unplug it for safety.
Be careful not to allow your fingers or hands to get caught in the rotating parts when opening or closing
the printer cover.
Voluntary Control of Electrical Wave Hazards
This printer is considered a Class A Information Technology equipment according to the standards as prescribed by the
Voluntary Control Counsel for Interference by Information Technology Equipment (VCCI). This printer made cause electrical
wave interference if used in a home environment. In such cases users should take the appropriate precautions.
TSP1000 Series Product Specifications
9-2
