Adjusting the Paper Stopper
7-3
This printer requires a paper stopper to be mounted onto the printer cover to prevent paper from raising in the stacker.
Use the following procedures to arrange the paper stopper at the appropriate position to use the printer.
Also, read the information listed in the other sections relating to the paper stopper position and the receipt lengths.
1.
Grip both ends of the paper stopper, insert the side bosses on the paper stopper into the printer cover
engaging holes elastically deforming the paper stopper.
2.
T
o adjust a position
again, elastically deform the paper stopper and change its position to the next position
after removing the paper stopper.
Note 1: There are three positions in the printer cover. The paper stopper and the engaging holes are arranged in
those positions.
By reversing the direction of mounting of the paper stopper, it is possible to make two types of paper
stopper position settings with one engaging hole position on the printer cover.
Note 2: Do not forcefully remove the paper stopper from the printer cover when adjusting the position of the paper
stopper. This can damage the parts.
TSP1000 Series Product Specifications
7-3
