50
Use the following codes for the LED color setting data.
Use the following codes for LED operation and buzzer setting data.
Code Function
20h
‘ ’
Continues current operation
30h ‘0’
Turns
OFF
31h ‘1’
Turns
ON
32h ‘2’
Starts
blinking
33h ‘3’
Blinks
once
34h
‘4’
Blinks three times
(4)
Card transport count request command
This command request the number of times cards have been transported in the device, as a
reference.
The transport count data string reads out the count that cards have passed over the magnetic
head up to 10 digits.
Reciprocal transports are counted as two times.
When the power is cut, the transport count less than 10 times is rounded down.
Command Transfer Formats
STX 95h Data
String
ETX BCC
Response Transfer Formats
STX 95h Status
Transport count data ETX
BCC
Code Function
Either of 47h (‘G’)/67h (‘g’)/31h (‘1’)
Sets to green.
Either of 4Fh (‘O’)/6Fh (‘o’)/33h (‘3’)
Sets to orange.
Either of 52h (‘R’)/72h (‘r’)/32h (‘2’)
Sets to red.
