19
(12) Reverse 7 bit format third track data setting command (Model: 310)
This command sets the write data to the third track with a reverse 7-bit format.
Excluding 02h (STX) and 03h (ETX), the write data string must be data from 01h to 7Eh in 0
to 69 bytes.
The starting and ending symbols, LRC and parity bit on the magnetic stripe are all
automatically applied. A reject response is issued when an error is detected in the write data.
Note that this command cannot be used with on models with one magnetic stripe (TCP300).
* This command generates magnetic strip data that is in the direction opposite to the 7 bit
format third track data setting command 3Ah.
Command Transfer Formats
STX
37h
Write data string ETX
BCC
Response Transfer Formats
STX 37h Status
ETX BCC
(13) 7 bit format first track data setting command (Model: 310)
This command sets the write data to the first track with a 7-bit format. Excluding 02h (STX)
and 03h (ETX), the write data string must be data from 01h to 7Eh in 0 to 69 bytes.
The starting and ending symbols, LRC and parity bit on the magnetic stripe are all
automatically applied. A reject response is issued when an error is detected in the write data.
Note that this command cannot be used with on models with one magnetic stripe (TCP300).
Command Transfer Formats
STX
38h
Write data string ETX
BCC
Response Transfer Formats
STX 38h Status
ETX BCC
(14) 7 bit format second track data setting command (Models: 300/310)
This command sets the write data to the second track with a 7-bit format.
Excluding 02h (STX) and 03h (ETX), the write data string must be data from 01h to 7Eh in 0
to 69 bytes.
The starting and ending symbols, LRC and parity bit on the magnetic stripe are all
automatically applied. A reject response is issued when an error is detected in the write data.
Command Transfer Formats
STX
39h
Write data string ETX
BCC
Response Transfer Formats
STX 39h Status
ETX BCC
