Star Micronics Star SCP700 Series, Programmer'S Manual

Page: 76 / 84

74
3) N=2
n3 :Always “0”
(Default)
4) N=3
n1 :Always “0”
(Default)
5) N=4
n2 :Always “0”
n3 :Always “0”
n4 :Always “0”
(Default)
6) N=5
n1 :Always “0”
n3 :Always “0”
(Default)
Parameter Setting 0 1
n1 Receipt printer ESC d
command
Receipt printer Cut Paper feed,
& Cut
n2 Receipt printer cutter Valid Invalid
n3 Cover Open Invalid Valid
n4 Receipt printer paper
near end Invalid Valid
Parameter Setting 0 1 2 3
n2 Character table Normal IBM Katakana IBM
n3 Receipt printer printer
column 48 38 – –
n4 CR code Invalid Invalid Valid Valid
Receipt printer line feed
(mm) 4 3 4 3
Parameter Setting 0 1
n1 X on/X off Timing When
Toggled every 3 sec
Parameter Setting 0 1 2 3
n2 When slip printer <CR>
code is valid Print +
line feed
(CRLF) print
(CR) – –
n4 Slip printer automatic
clamp Valid Valid Invalid Invalid
Slip printer automatic
starting print positioning Valid Invalid Valid Invalid