34
<ESC> “b”
n1
n2
n3
n4
d1
... dk
<RS>
1B
62
n1
n2
n3
n4
d1
... dk 1E
Select bar code printing
Prints bar code according to the value of n1, as shown below:
This command is only valid with the receipt printer.
n1: Type of bar code
0
UPC-E
1
UPC-A
2
JAN/EAN-8
3
JAN/EAN-13
4
CODE 39
5
ITF
6
CODE 128
7
CODE 93
8
NW-7
The value of n1 can be set to 0(00H) or 8(08H) or “0”(30H) to
“8”(38H).
n2: Printing character below bar code or line feed
1
Character below bar code is not printed, Line feed is
performed after execution of command.
2
Character below bar code is printed, Line feed is
performed after execution of command.
3
Character below bar code is not printed, Line feed is
not performed after execution of command.
4
Character below bar code is printed, Line feed is not
performed after execution of command.
The value of n2 can be set to 1(01H) to 4(04H) or “1”(31H) to
“4”(34H).
n3: Mode of bar code
UPC-E, UPC-A, JAN/EAN-8, JAN/EAN-13, CODE 128,
CODE 93
1
Minimum module 2 dots
2
Minimum module 3 dots
3
Minimum module 4 dots
CODE
HEX
FUNCTION
Summary of Contents for Star SCP700 Series
