D-F0390 NP-326 Product specifications Ver.0.02
39
44) Partition drive select :<< GS % n >>
Code
: [1D] h + [25] h + n
* [01
≤
n
≤
03] h
Description
: Selects partition drive.
* “n” indicates the following:
n(HEX) Divide
01
1 fixed partition
02
2 fixed partitions
03 automatic
partition
* Default value is selected by the DIP switch.
* If assigned beyond the specified area, the data is neglected and the select will not
change.
* Automatic partition is as follows:
1 partition
2 partitions
NP-226 Less than 248 dots More than 249 dots
NP-326 Less than 352 dots More than 353 dots
45) Print density set
:<< GS ~ n >>
Code
: [1D] h + [7E] h + n
* [41
≤
n
≤
87] h
Description
: Sets print density in the range between 65% ~ 135% of the standard value,
S2-8 Off.
* “n” ranges from [41] h (65%) to [87] h (135%). However, set it for actual use in the
range [41] h (65%)
≤
n
≤
[82] h (130%).
* At the initial status, 100% or 125% can be selected by the DIP switch, S2-8.
* This command has priority over the setting by DIP switch.
46) Japanese Kanji overall print mode setting: << FS ! n >>
Code
: [1C] h + [21] h + n
* [00
≤
n
≤
FF] h
Description : Set Japanese Kanji overall print mode
“n” has following meanings
Values
Bit Function
0 1
0
Undefined
-
-
1
Undefined
-
-
2
Double
width
Reset
Set
3
Double
height
Reset
Set
4
Undefined
-
-
5
Undefined
-
-
6
Undefined
-
-
7
Underline
Reset
Set
* If double height and double width are set at the same time quadruple character will be formed.
* All of the printed characters will be underlined except for the 90
°
rotated characters and spaces
created by horizontal tab.
* Underline width is determined by the value set in [Underline set/reset] section.
The default value is “1”.
* Different sizes of character mixed such as double width and normal size can be printed.
* The default value of “n” is [00] h.
