Star Headlight & Lantern TD93-NYDOT Installation And Instruction Manual Download Page 6

-4- 

(Operation CONT’D) 

4.  Select the desired pattern (if different from 

the current pattern) by using any of the 

Pattern Select

 buttons.  The 

Pattern Select

 

buttons include 

Left

Center

Right

Warn

 

and

 

Alt 

(patterns shown to the right)

.  The 

selected pattern label should change to red 
and the light output should mimic exactly the 
display on the controller.

 

 

 
 

5.  The TD77-NYDOT2 controllers also have two 

"option" buttons: Fast and Dim. 

 

Fast Button 

(Left / Center Out / Right Patterns Only) 

 

The "Fast" button provides the user with the option to 

display the Left, Center Out, or Right patterns in a 
"faster" mode.  Pressing the "Fast" button once 
should change the "Fast" label to red and speed up 
the pattern.  Pressing the button again will change 
the "

Fast

" label back to green and revert the pattern 

to the standard speed. 

 

Dim Button 

This button allows the user the option to dim the light 
for nighttime operation.  When the "Dim" button is 
pressed once the "Dim" label will change from green 
to red and the Traffic Director will dim slightly (50%).  
Pressing it a second time will change the button back 
to Green and return the Traffic Director to full 
brightness. 

 
 

6.  To avoid possible damage, the controller should be 

turned off prior to engine starting.  It is possible, 
though not likely, to confuse the controller if the 
vehicle's battery is low and the engine is started with 
the controller running.  If you notice that the 
controller's display shows something out of the 
ordinary, simply push the power switch to the off 
position and back on again.  This should clear any 
fault caused by improper voltage being supplied to 
the unit.  

 
 

7.  Once your Traffic Director is installed, please test all 

the patterns, options, and alternate versions to 
familiarize yourself with the various patterns and the 
operation of the controller. 

LEFT

CENTER OUT

RIGHT

WARN

ALT

=OFF                               = ON

When using the Traffic Director, always be sure 
that  the  pattern  selected  is  appropriate  for  the 
present  hazard  condition.   

The  potential 

danger  in  displaying  an  inappropriate 
pattern cannot be overstated.

 

Summary of Contents for TD93-NYDOT









Reviews: