-i-
It is the sole responsibility of the owner to ensure the lightbar is
mounted securely. Check your light every time you enter the
vehicle to ensure that it is mounted securely. The manufacturer
assumes no responsibility for the secure mounting of this light.
Before beginning the installation:
- Determine where the Traffic Director is to be mounted (on your lightbar, on
your roof, in your rear window, etc.
- Check to see that there are no obstructions hindering the visibility of your
traffic director.
- Then select a location to mount your controller. The controller must be
located in a dry location out of direct sunlight, free of dirt and dust. Under the
vehicle's instrument panel is usually the best choice.
- Once you have selected these locations, determine the path your cable,
which connects the controller to the Traffic Director, will take. The cable
should exit the left side of the Traffic Director when you are facing both the
stick and the controller.
These traffic directors come with a short pigtail out of the side of the light that
attaches to the main harness. The available lengths for the harnesses are 15',
30', 45', and 60'. Be sure the harness you ordered is long enough for proper
installation.
Star does not recommend “splicing in” additional cable when
the supplied cable is too short.
If it is too short, you will need to order a
harness of the correct length.
Summary of Contents for TD93-NYDOT
Page 8: ......
