22
Bit4 :
Reserved
Bit5 :
Tone (T)/Pulse(P)
0 = Tone(T) (Default)
1 = Pulse (P)
Bit6 :
Reserved
Bit7 :
Originate/Answer
0 = Answer
1 = Originate (Default)
S15 - Reserved
S16 - General Bit Mapped Test Options Status
Indicates the test in progress status.
Default:
0
Bit0 :
Local analog loopback
0 = Not in progress (Default)
1 = In progress (&T1)
Bit1 :
Not used
Bit2 :
Local digital loopback
0 = Not in progress (Default)
1 = In progress (&T3)
Bit3 :
Remote digital loopback (RDL)
0 = Modem not in RDL (Default)
1 = RDL in progress
Bit4 :
RDL requested
0 = RDL not requested (Default)
1 = RDL requested (&T6)
Bit5 :
RDL with self test
0 = RDL not requested (Default)
1 = RDL requested (&T7)
Bit6 :
Local analog loopback (LAL) with self test
0 = Not in progress (Default)
1 = In progress (&T8)
Bit7 :
Not used
S17 - Reserved
S18 - Test Timer
Sets the length of time, in seconds, that the modem conducts a test (commanded by &Tn) before returning to
the command mode. If this register value is zero, the test will not automatically terminate; the test must be
terminated from the command mode by issuing a &T0 or H command. When S 18 is non-zero, the modem
returns the OK message upon test termination.
Range:
0-255 seconds
Default:
0
S19 - AutoSync Bit Mapped Options
Defines the options for AutoSync operation (see &Q4 command). S19 must be set to the desired value
