V 1.4
8839615
For technical questions call: 1-800-665-8685
10
UNPACKING AND ASSEMBLY
Step Description
19.
Attach the windshield by placing it onto the brackets and fasten it with the two M6 x 25mm button head
screws and M6 wing nuts (Fig.14).
20.
Attach the windshield bracket (Fig. 15) by using a Philips screwdriver and a 8mm socket and socket
wrench to attach the windshield bracket as shown in Fig. 12 with the two M6 x 25mm Philips button head
screws, flat washers and nuts.
21.
Use the M6 x 35mm Philips button head screw, rubber spacers, flat washer, and wing nut to secure the
windshield in the upright position as shown in Fig. 16. Note: The rubber washers should be between the
bracket and the windshield, and the flat washer should be behind the wing nut on the inside of the
vehicle.
Fig. 13
Fig.14
Fig.15
Fig.16
Fig. 17
Fig. 18
