background image

10

11

CAUTION. 

Unpack all parts and lay them on a flat, stable surface.

Remove all packing materials and shipping devices if applicable.

Make sure the delivery contents are complete and free of any 
damage. If you find that parts are missing or show damage do 
not use the product but contact customer service. 

USING THE RIGHT ENGINE OIL

 CAUTION!

 Lubricant has a major influence on  

 engine performance and service life. The machine is  

 

  equipped with a 4-Stroke engine and must always run  

 

  using 4-Stroke engine lubricant. Use high-quality oil.  

 

  DO NOT fill with used oil. Failure to use clean oil of  

 

  the correct type can cause premature engine wear and  

   failure.

 WARNING!

 Do not change engine lubricant while  

 it is hot. Accidental contact with hot engine lubricant  

 

  could result in serious burns.

NOTE: This unit was shipped without oil in the crankcase. Oil 
must be added before starting the unit.

Attention: Must use API SF grade or the higher grade SAE 
10W-30 lubricating oil (four stroke lubricating oil for the engine 
of car);

 WARNING: OVERFILLING THE  

 CRANKCASE MAY CAUSE SERIOUS  

    PERSONAL INJURY.

NOTE: Check the oil level before each use.

1.   When the machine is filled with oil for the first time, 
 

you must use the oil bottle (22) with 60ml, then open 

 

the oil cap (20) and fill the oil into the oil tank of machine  

 

(see Fig. 1).

2.   When the machine is used again after the first time, check  
 

the oil before use. Ensure the oil level is always close to  

 

the full position visually (see Fig. 2). Either insufficient oil or  

 

overfilled oil both causes the malfunction of machine.

For best performance, engine lubricant should be changed 
entirely after every 25 hours of operation. Please pour out all the 
oil and refill with the new lubricating oil instead.

UNPACKING

PREPARATION

Using an incomplete or damaged product represents a hazard to 
people and property.

Ensure that you have all the accessories and tools needed for 
assembly and operation. This also includes suitable personal 
protective equipment.

Fig. 1

Fig. 2

NOTE: Never add oil to the fuel tank. This unit has a 4 - stroke 
engine. DO NOT mix oil with petrol.

Summary of Contents for SXPG42604

























Reviews: