12 • ENGLISH
CLEANING
¡Warning! unplug the tool before you use a cloth to
clean the housing.With the motor running, blow dirt and
dust out of all air vents with dry air at least once a week.
Wear safety glasses when performing this. Exterior
plastic parts may be cleaned with a damp cloth and
mild detergent. Although these parts are highly solvent
resistant, NEVER use solvents.
TOOL CARE
Avoid overloading the machine.Overloading will result in
a considerable reduction in speed and efficiency and the
unit will become hot. In this event,run the machine at no
load for a minute or two until cooled to normal working
temperature by the built in fan. Switching your machine on
and off whilst under load will considerably reduce the life
of the switch.
¡Important!To ensure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in thismanual) should be
performed by authorized service centers or other qualified
organizations, always-using identicalreplacement parts.
Unit contains no user serviceable parts inside.
ACCESSORIES
The performance of any power tool is dependent upon the
accessory used. Stanley accessories are engineered to
high quality standards and are designed to enhance the
performance of power tool. By using Stanley accessories
will ensure that you get the very best from your Stanley
tool. Stanley offers a large selection of accessories
available at our local dealer or authorized service center
at extracost.
Note: Accessory must be rated for use at speed equal
to or higher than nameplate RPM of tool with which it is
beingused.
¡Caution! The use of any non-recommended
accesories may be hazardous.
NOTES
f
Stanley’s policy is one of continuous improvement to
our products and, as such, we reserve the right to
change product specifications without prior notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local Stanley dealers for
range availability.
f
Pictures of product may differ to actual unit. Some
units do not include side-handle &/or grinding wheel.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stnley product
needs replacement, or if it is of no further use
to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
Stanley offers a full network of company-owned and
authorized service locations. All Stanley Service Centers
are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and
if you need technical advice, repair, or genuine factory
replacement parts, contact the Stanley location nearest you.
