Stanley MB656 User Manual Download Page 28 | Manualshive

Page: 28 / 36

Stanley MB656 User Manual Download Page 28

28 ► MB656

User

Manual

Description

Part No.

Tool Bits

Conical...............................................................................................................................................................28123

Blunt ..................................................................................................................................................................28126

Chisel, Line-cut ..................................................................................................................................................28124

Chisel, Cross-cut ...............................................................................................................................................28125

Tamping Pad Assy. ............................................................................................................................................18942

Miscellaneous

Attaching Kits....................................................................................................................................... Consult Dealer

Adapter Assembly..............................................................................................................................................33300

Charge Hose Assembly (Includes Valve and Hose for Nitrogen Tank & Charge Valve Connections) .............505232

Charge Kit Assembly (Includes P/N 505232, 28257 and 372047 Charge Kit Box) ...........................................34892

Accumulator Tester ............................................................................................................................................28257

Service Kit (For Rebuild MB556, 656, 856, 956, 10) .........................................................................................40373

Hose Guard Kit, 20 degree, Bolt on Skidsteer...................................................................................................59096

Conversion Kit to Adapt Breaker to Skidsteer ...................................................................................................56599

ACCESSORIES

«
...
26
27
28
29
30
...
»

Summary of Contents for MB656





































Reviews:

No comments