Stanley FATMAX SFMCMW2651, Original Instructions Manual

Page: 35 / 192

33
ENGLISh
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b ) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
a
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury .
WARNING:
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury
.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury .
NOTICE:
Indicates a practice
not related to
personal injury
which, if not avoided,
may
result in
property damage .
Denotes risk of electric shock.
Denotes risk of fire.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
2 x 18V Mower
SFMCMW2651
STANLEY FATMAX declares that these products described under
“technical data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN60335‑1:2012 + AC:2014 +
A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019,
EN60335‑2‑77:2010.
These products also conform to the following UK Regulations
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended),
Schedule 9.
Intertek Testing & Certification Ltd, Academy Place, 1‑9
Brook Street, Brentwood, Essex, CM14 5NQ, United Kingdom.
Approved Body Number: 0359
Level of Acoustic Power according to
(Schedule 1, Annex VI, 50 < L ≤ 50:
LWA (measured sound power level) 87 dB(A),
Uncertainty (K) = 0.9 dB (A),
LWA (guaranteed sound power) 88 dB(A).
For more information, please contact STANLEY FATMAX at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of STANLEY FATMAX.
Paul Featherstone
Vice President Professional Power Tools EANZ GTS
270 Bath Road, Slough
Berkshire SL1 4DX
England
12.04.2020
Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight
*Date code 201811475B or later
**Date code 201536 or later
Batteries Chargers/Charge Times (Minutes)
Cat # V
DC
SFMCB12
SFMCB202 18 X
SFMCB204 18 X
SFMCB206 18 X