Stanley FATMAX FMHT77652, User Manual

Page: 7 / 166

GB
7
To change to a lower Accuracy:
1.
On the Detector's LCD screen, view the current
accuracy setting (Figure
E 3
) .
2.
Press to change to the desired accuracy setting.
Press
Accuracy
Setting
On LCD
screen
Default
HIGH
≤ 1 mm
≤ 0.05 in
≤ 1/16 in
x1
MEDIUM
≤ 2 mm
≤ 0.10 in
≤ 1/8 in
x2
LOW
≤ 5 mm
≤ 0.20 in
≤ 1/4 in
x3
LOWEST
≤ 10 mm
≤ 0.50 in
≤ 1/2 in
Changing the Measurement Type
By default measurements are displayed on the LCD
screen in millimeters (mm). You can change to decimal
inches or fractional inches.
1.
On the Detector's LCD screen, view the current
measurement type (Figure
E 2
).
2.
Press to change the measurement type.
Press
IN
MM
Measurement
Type
On LCD
screen
Default millimeters mm
x1 decimal inches in
x2 fractional inches in
Adjusting the Speaker Volume
By default the detector's volume is set to LOUD. You
can lower the volume or turn the sound off.
1.
On the Detector's LCD screen, view the current
speaker volume setting (Figure
E 4
) .
2.
Press to change to the desired speaker volume
setting.
Press
Speaker
Volume
On
LCD screen
Default LOUD
x1 SOFT
x2 MUTE No Icon
Detecting a Laser Beam
1.
While powered ON, position the Detector where the
laser beam is projected.
• Use the Detector’s bubble vials (Figure
A
2
) to
maintain a level plane.
• Within 45° of the laser source, point the
reception window (Figure
A 3
) toward the laser
beam.
2. Use the following indicators to align the
Detector's Reference Line (Figure
A 1
) with the
laser beam.