Stanley FatMax FMHT77356, User Manual

Page: 7 / 210

7
Compliance
This product complies with 21 CFR 1040.10 and
1040.11 except for deviations pursuant to laser Notice
50, dated June 24, 2007.
Conforms to UL STDS 61010-1 & 2595
Certified to CSA STD C22.2 No. 61010-1
Product Overview
Figure A - Laser Tool
1. Laser Window/Aperture
2. Keypad Switch
3. Power/pendulum Lock Switch
4. DC Power supply jack
Figure B -
Power /Transport Lock
5. Label
6. 1/4-20 and 5/8-11 threaded mount
Figure C - Keypad and Laser Modes
7. Battery/Power
8. Beam Activation Key
9. Pulse Mode Activation Key
10. Pulse Mode/Out of level indicator LED
Figure D -
Beam Options
Figure E - Horizontal Beam Scan Direction Accuracy
Figure F - Horizontal Beam Pitch Direction Accuracy
Figure G - Vertical Beam Accuracy
Figure H - Vertical Beam 90° Accuracy
Keypad, Modes, and LED
Power /Pendulum Lock Switch (Fig B)
Power ON/Pendulum lock off /Self-leveling
On
Power OFF/Pendulum lock on
• To turn the laser tool ON move switch to the
unlocked position
• To turn the laser tool OFF, move switch to the locked
position
Modes
Laser Beam Available Modes.
See Figures C and D for beam configuration.
Self-Leveling (Fig B)
• The pendulum lock on the laser tool needs to be
switched to the unlocked /ON position to enable
self-leveling when placed in a position <4 °.
Out of Level (Fig B)
• If the laser has been tilted > 4° then it cannot
self-level and the laser beam will flash.
Keypad-Pulse key.
Pulse mode ON/OFF key
(See figure )
Press to activate Pulse mode.
(See figure # 9)
Pulse Mode LED/Out-of-Level Indicator Operation
(See figure # 10)
LED OFF
1. Pulse Mode is OFF/ Unit is level
LED ON-CONTINUOUS GREEN
2. PULSE MODE is ON, and laser unit is within self-
leveling range. (<4 °)
LED ON-FLASHING RED
3. Laser unit is OUT OF LEVEL and beams will flash.
(PULSE MODE may be ON or OFF depending on
initial state set.)
Keypad-Battery key
Battery level indicator key
(See figure )
Battery Life LED
(See figure # 7)