Standen ZENO 21, Manual

Page: 24 / 65

Control System
The control console consists of the Z-PAD touch screen (item 1, fig 20) and various
manual switches.
POWER ON/OFF (item 2, fig 20).
Turns the control system ON and OFF.
STEERING LEFT / RIGHT (item 3, fig 20).
Steers the planter wheels left / right.
HOPPER RAISE / LOWER (item 4, fig 20).
Raises / lowers the rear section of the tipping hopper.
HOPPER AUTO (item 5, fig 20).
Activates the automatic raise / lower function to feed the seed to the hopper belts.
Always turn the control system OFF before transporting the planter on
the road.
Do not leave or store the control consoles outside in the open and
always disconnect the control box from the tractor electrical supply
when not in use, so avoiding the possibility of draining the battery.
WELDING WARNING:
Before carrying out any welding on the planter, always disconnect
the plugs (item 1, fig 21). Failure to observe the above precaution
may result in severe damage to the planter control system.
1.19 OPERATION
Fig 21 Fig 20