background image

7

WI-FI SETUP MENU of the RAM4W

NOTE

:  If the MENU key on the 

RAM4W

 is pressed while searching for 

SCU-30

 

after turning on 

RAM4W

, the WI-FI SETUP screen will be called directly.

WPS (Wi-Fi Protected Setup)

This menu item connects the 

RAM4W

 and the 

GX6500

/

GX6000

 using the WPS 

function.

1. 

[

]  

 

SETUP

” 

 

WI-FI SETUP

” 

 

WPS

(RAM4W)

2.  Press the [

YES

] soft key to display the WPS screen.

3.  Refer  to  “

WPS (Wi-Fi Protected Setup)

” in the WI-FI 

SETUP MENU of the 

GX6500

/

GX6000

 (Page 9) to display 

the WPS screen on the 

GX6500

/

GX6000

.

4.  Connect the 

RAM4W

 and the 

GX6500

/

GX6000

 using the  

same procedure as step 4 in 

Connecting the RAM4W 

and the GX6500/GX6000

 (Page 6).

 

When 

Subscribed

” is displayed, connection of the 

RAM4W

 

and the 

GX6500

/

GX6000

 is completed.  Once the connection 

is completed, thereafter they will be connected automatically 

when the 

GX6500/GX6000

 and the 

RAM4W

 are turned ON.

 

Up to four 

RAM4W

 remote microphones can be connected 

simultaneously to the 

GX6500

/

GX6000

.

                                                                                                                                                   

押下後

CONNECTION

This menu item displays the information of the 

SCU-30

 and the 

RAM4W

 that are 

previously connected, and can be connect to the 

SCU-30

.

1. 

[

]  

 

SETUP

” 

 

WI-FI SETUP

” 

 

CONNECTION

(RAM4W)

  The information of the 

SCU-30

 is displayed. The “

” icon 

is shown on the right side on the currently connected 

SCU-30

.

2.  Rotate  the 

DIAL/ENT

 knob to select the desired 

SCU-30

 

from the list, and press the [

SELECT

] soft key.

 

The connection information of the selected 

SCU-30

 is displayed.

 

 Deleting the 

SCU-30

 from the list

Rotate the 

DIAL/ENT

 knob to select the 

SCU-30

 that is 

not currently connected and then press the [

DELETE

soft key to delete the 

SCU-30

 from the list.

 

3.  Press the [

CONNECT

] soft key on the connection informa-

tion screen to connect to the selected 

SCU-30

.

  If “

Error!

” appears on the screen, press the [

OK

] soft key, 

then perform step 1.

 

 

Summary of Contents for RAM4W













Reviews: