background image

5

Battery Safety

This equipment contains a built-in Li-ion battery. This type of battery stores a charge 

powerful enough to be dangerous if misused or abused, especially when removed 

from the equipment. Please observe the following precautions:

DO NOT SHORT BATTERY PACK TERMINALS

: Shorting the terminals that power the 

equipment can cause sparks, severe overheating, burns, and battery cell damage. If the short 

is of sufficient duration, it is possible to melt battery components. Do not place a loose battery 

pack on or near metal surfaces or objects such as paper clips, keys, tools, etc.

DO NOT INCINERATE

: Do not dispose of any battery in a fire or incinerator. The heat 

of fire may cause battery cells to explode and/or release dangerous gases.

Battery Maintenance

For safe and proper battery use, please observe the following:

  Battery packs should be charged only in non-hazardous environments.

  Use only STANDARD HORIZON-approved batteries.

  Use only a STANDARD HORIZON-approved charger. The use of any other charger 

may cause permanent damage to the battery.

  Follow charging instructions provided with the chargers.

Battery Recycling

DO NOT PLACE USED BATTERIES IN THE REGULAR TRASH!

LI-ION BATTERIES MUST BE COLLECTED, RECYCLED OR 

DISPOSED OF IN AN ENVIRONMENTALLY SAFE MANNER.

Incinerating Li-ion batteries, placing them in the land fill, or mixing them with the mu

-

nicipal solid waste collection, is PROHIBITED BY LAW in most areas.

Return batteries to an approved Li-ion battery recycler. This may be available where 

the battery was purchased.

Contact your local waste management officials for other information regarding the envi

-

ronmentally safe collection, recycling and disposal of Li-ion batteries.

NOTE

:  Contact a Standard Horizon dealer or Factory Service about the built-in bat-

tery replacement.

Battery Life Information

: Full battery power
: Enough battery power
: Low battery power
: Poor battery power. Charge battery.

: Charge the battery immediately

When the “ 

 

” icon appears, it is recommended that you charge the bat-

tery soon.

WARNING

If the RAM4W will be unused for a long period of time, be sure to fully charge the built-in battery 

before storing it. When the RAM4W is stored for an extended period, recharge the built-in battery 

every six months to prevent it from over-discharging.

Summary of Contents for RAM4W













Reviews: