10
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment OFF and ON, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modifications to this equipment may void compliance with FCC Rules.
Any change or modification must be approved in writing by STANDARD HORIZON.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Specifications
Supply Voltage:
3.7 VDC
Current Consumption:
100 mA @AF Mute / 450 mA @VOL Max.
Operating Temperature:
–4°F to +140°F (–20°C to +60°C)
Wireless Networking Module:
FCC ID: K660A290910, IC: 511B-0A290910
Frequency Band:
2412 to 2462 MHz
Wireless Networking Standard:
IEEE 802.11 b/g/n
RF Output:
0.09 W
AF Output:
700 mW @ 8 ohms for 10 % THD
Display Size:
1.8” x 0.9” (45 mm x 23 mm)
Display Resolution:
222 x 162 dots
Dimensions (W x H x D):
2.5” x 5.3” x 1.3” (63 mm x 135 mm x 32.5 mm)
Weight (Approx):
7.76 oz (220 g) (with Belt Clip)
Symbol placed on the equipment
Direct Current
