Standard Horizon MAGNUM NAV-40 Owner'S Manual Download

Page: 88 / 100

As firmware updates become available, they may be uploaded from your com-
puter to the

MAGNUM

Software update when available can be downloaded from the following web site

www.standardhorizon.com

With the

MAGNUM

turned off, connect the

MAGNUM

to your computer,

using the supplied

CT-84

PC Interface Cable.

Press the [

MENU

] key, then highlight “

SETUP

.” Click on this selection.

Highlight the “

DATA

” selection, and click on it.

Highlight “

PROGRAM DOWNLOAD

,” and click on it. At the “

DOWNLOAD?

”

prompt, click on “

YES

.” The data will now be downloaded from your com-

puter. “

WAIT FReq

” will appear on the display. When done, “

COMPLETE

”

will appear.

Turn the

MAGNUM

off, and remove the

CT-84

from the rear panel connec-

tor.

Downloading

Program Updates

Summary of Contents for MAGNUM NAV-40





































































































Search results

Summary of Contents for MAGNUM NAV-40

Reviews:

Related manuals for MAGNUM NAV-40

Brands by name

Popular brands

Standard Horizon MAGNUM NAV-40, Owner'S Manual

Search results

Summary of Contents for MAGNUM NAV-40

Reviews:

Related manuals for MAGNUM NAV-40

Brands by name

Popular brands