Standard Horizon HX890, Owner'S Manual

Page: 67 / 116

65
4. When finished editing the position, press the [ FINISH ] soft key.
5. Select “ SAVE ” with the [ CH ▼]/[ CH▲ ] key, then press the [ SELECT ] soft
key to save the mark position into memory.
6. Press the [ CLR ] key to return to radio operation.
Adding a Waypoint
Press and hold
key

WAYPOINT SETUP

SELECT

WAYPOINT DIR.

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select
“ ADD ”, then press the [ SELECT ] soft key.
ADD
WAYPOINT SETUP
EDIT
DELETE
WAYPOINT DIR.
BACK SELECT
NAME:
001WPT----------
SELECT
WAYPOINT DIR.
BACK
SAVE
POSITION:
--
°
--.----
-
-
---
°
--.----
NAME:
STANDARD---------
ENTER
WAYPOINT DIR.
BACK
SAVE
POSITION:
34
°
25.9755
N
118
°
59.4566
W
2. Press the [ CH ▼]/[ CH▲ ] key to select
“
NAME
”, then press the [
SELECT
] soft key.
3. Enter the waypoint name by pressing the
[ CH ▼]/[ CH▲ ] key and the [ SELECT ] soft
key.
When finished entering the name, press the
[ FINISH ] soft key.
4. Press the [ CH ▼]/[ CH▲ ] key to select
“
POSITION
”, press the [
SELECT
] soft key,
then enter the coordinates.
When finished entering the position, press the [ FINISH ] soft key.
5. Select “
SAVE
” with the [
CH
▼]/[
CH▲
] key, then press the [
SELECT
] soft
key to save the waypoint into memory.
6. Press the [ CLR ] key to return to radio operation.
Editing a Waypoint
This function allows a previously entered waypoint to be edited.
Press and hold
key

WAYPOINT SETUP

SELECT

WAYPOINT DIR.

SELECT
( / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select
“ EDIT ”, then press the [ SELECT ] soft key.
2. Press the [ CH ▼]/[ CH▲ ] key to select
the waypoint to be edited, then press the
[ SELECT ] soft key to show the waypoint
input screen.
ADD
WAYPOINT SETUP
EDIT
DELETE
WAYPOINT DIR.
BACK SELECT
Standard
USCG
WAYPOINT DIR.
BACK SELECT
EDIT
KAREN
366901254
BOB
Horizon-1
Horizon-2