40
10.4 INDIVIDUAL CALL
This feature allows the
HX890
to contact another vessel with a DSC VHF radio
and automatically switch the receiving radio to a desired communications chan-
nel. This feature is similar to calling a vessel on CH16 and requesting to go to
another channel (switching to the channel is private between the two vessels).
Up to 100 individual contacts may be programmed.
10.4.1 Setting up the Individual Call Directory
The
HX890
has a DSC directory that allows you to store a vessel or person’s
name and the associated MMSI number you wish to contact via individual calls,
position report, and test call transmissions.
To transmit an individual call, this directory must be programed with information
of the vessel you wish to call, similar to a cellular phones telephone directory.
Press and hold
key
DSC SETUP
SELECT
INDIVIDUAL DIR.
SELECT
(
/
key)
(
key)
(
/
key)
(
key)
1. Press the [
CH
▼]/[
CH▲
] key to select
“
ADD
”, then press the [
SELECT
] soft key.
ADD
BACK
DSC SETUP
EDIT
DELETE
SELECT
INDIVIDUAL DIR.
SAVE
NAME:
-----------------
---------
MMSI:
SELECT
INDIVIDUAL DIR.
BACK
BACK
SELECT
FINISH
INDIVIDUAL DIR.
NAME
Z
Y
1 2
a&
[
3 4 5 6 7 8 9
0
N
M
O P Q R
S
T U V W X
B
A C D E F G H I J K L
Delete
-
-------------
S
2. Press the [
CH
▼]/[
CH▲
] key to select
“
NAME:
”, then press the [
SELECT
] soft key.
3. Press the [
CH
▼]/[
CH▲
]/[◄]/[
►
] key to elect
the first letter of the name of the vessel or
person you want to reference in the directory.
4. Press the [
SELECT
] soft key to store the
first letter in the name and step to the next
letter to the right.
5. Repeat steps 3 and 4 until the name is complete. The name can consist of
up to eleven characters, and if you do not use all eleven characters, select
“→” to move to the next space. This method can also be used to enter a
blank space in the name.
If a mistake was made entering in the name, press the [
CH
▼]/[
CH▲
]/[◄]/
[
►
] key to select “←” or “→”, press the [
SELECT
] soft key until the wrong
character is selected, then perform steps 3 and 4.
6.
After the fifteenth letter or space has been entered, press the [
FINISH
] soft
key to advance to the MMSI number entry.
7. Press the [
CH
▼]/[
CH▲
]/[◄]/[
►
] key to select numbers, 0 - 9. To enter the
desired number and move one space to the right by pressing the [
ENTER
] soft key.
Repeat this procedure until all nine characters of the MMSI number are entered.
If a mistake was made entering in the MMSI number, press the [
CH
▼]/
[
CH▲
]/[◄]/[
►
]
key to select “←” or “→”, press the [
SELECT
] soft key until
the wrong character is selected, then perform step 7.
Summary of Contents for HX890
Page 1: ...HX890 HX890E Class H DSC GPS Transceiver Owner s Manual...
Page 113: ...111 NOTE...
Page 114: ...112 NOTE...
