Standard Horizon HX890, Owner'S Manual

Page: 56 / 116

54
DSC Position Report Call by Manually Entering an MMSI
This feature allows you to send your position to another vessel by manually
entering the MMSI of intended vessel.
Press
key
 
SELECT

POS REPORT

SELECT
( / / / key) ( key) ( / key) ( key)
1. Press the [ CH ▼]/[ CH▲ ] key to select “ NEW
ID ”, then press the [ SELECT ] soft key.
HISTORY
MEMORY
NEW ID
POS REPORT
BACK SELECT
BACK SELECT FINISH
POS REPORT
MMSI
- 98765432
1 5 6 7 8 9 0 2 4
Delete
3
POS REPORT CALL
CATEG:
SAFETY
987654321
POS:
24
TIME:
09:56
°
25.9755
N
118
°
59.4566
W
Do you want to
transmit a Call?
YES NO POS/TM
POS REPORT CALL
Transmitted
CATEG:
SAFETY
987654321
POS:
QUIT
24
TIME:
09:56
°
25.9755
N
118 ° 59.4566
W
2. Press the [ CH ▼]/[ CH▲ ] key to select the
first digit of the MMSI that you want to
contact, then press the [ SELECT ] soft key
to step to the next digit.
3. Repeat step 2 to complete the MMSI number.
If a mistake was made while entering the
MMSI number, press the [ CH ▼]/[ CH▲ ]/
[◄]/[ ► ] key to select “←” or “→”, press the
[ SELECT ] soft key until the wrong character
is selected, then perform step 2 and enter
the correct numeral.
4. When the MMSI number is complete, press the [ FINISH ] soft key.
5. If you want to change the position displayed, press the [ POS / TM ] soft key
to go to the position information input screen. After inputting new position
information, press the [ FINISH ] soft key to confirm.
6. Press the [ YES ] soft key to send your position to the selected vessel.
7. Press the [ QUIT ] soft key to return to radio operation.
DSC Position Report Call by Manually Input Location and Time
If the HX890 is located in an area where GPS reception is limited and you want
to transmit a position report call, you may manually input the location (latitude
and longitude) and time to be sent. For details, refer to section “ 10.6.2 Manual
Input of Position Information ”.
10.7.2 Receiving a DSC Position Report Call
When another vessel transmits their vessels location to the HX890 the follow-
ing will happen:
1. When a position report call is received from
another vessel, a ringing sound will be produced.
CATEG:
SAFETY
RX POS REPORT
Horizon
987654321
POS:
24
°
25.9755
N
118
°
59.4566
W
TIME:
12:
SINCE:
00:05
56
AM LOC
SAVE QUIT INFO
RX POS REPORT
Horizon
POS INFO
987654321
POS:
24
°
25.9755
N
118
°
59.4566
W
TIME:
12:
DST:
10
BRG:
006
56
AM LOC
NH
°
T
BACK QUIT TO WPT
2. Press any key to stop the ringing.
3. Press the [ INFO ] soft key to see more
detailed position information of the station.
4. To exit and return to radio mode, press the
[ QUIT ] soft key.