Standard Horizon GX2000E, Owner'S Manual

Page: 91 / 128

Page 91 GX2000E/GX2100E
11.6 CHANNEL NAME
When radio mode (NORMAL) is selected, the display will show a name under
the channel number. This name describes the use of the channel. The radio
has the capability to customize the name by the procedure below.
Example : CH69 PLEASURE to HOOKUP
1. Press and hold down the [ CALL
(
MENU
)] key until
“
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “
CH FUNCTION
SETUP
”.
3. Press the [ SELECT
] soft key, then select “
CH NAME ”
with the CHANNEL knob.
4. Press the [ SELECT
] soft key.
5. Rotate the CHANNEL knob to select the channel to
be named, then press the [ ENT
] soft key.
6. Rotate the CHANNEL knob to scroll through the first
letter of the new channel name.
7. Press the [ ENT
] soft key to store the first letter in
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to 16 characters, if you
do not use all 16 characters press the [
ENT
] soft
key to move to the next space. This method can
also be used to enter a blank space in the name. If
a mistake was made entering in the name repeat
pressing the [
BACK
] key until the wrong character
is selected, then rotate the CHANNEL knob to cor-
rect the entry.
9. Press and hold the [ ENT
] soft key to save the name.
10. If you want to enter the name of another channel, repeat steps 5 through 9.
11. Press the [
QUIT
] soft key several times to return to radio operation.