Standard Horizon GX2000E, Owner'S Manual

Page: 34 / 128

GX2000E/GX2100E Page 34
8.4 SIMPLEX/DUPLEX CHANNEL USE
Refer to the VHF MARINE CHANNEL CHART (page 120) for instructions on
use of simplex and duplex channels.
NOTE
All channels are factory-programmed in accordance with FCC (USA),
Industry Canada (Canada), and International regulations. Mode of op-
eration cannot be altered from simplex to duplex or vice-versa.
8.5 DISPLAY TYPE
The GX2000E/GX2100E display can be setup to show displays other than the
default “NORMAL” VHF display by using the procedure below:
1. Press and hold down the [ CALL
(
MENU
)] key until
“
Setup Menu
” appears, then select “
GENERAL SETUP
”
with the CHANNEL knob.
2. Press the [ SELECT
] soft key, then rotate the
CHAN-
NEL knob to select “ DISPLAY ”.
3. Press the [ SELECT
] soft key.
4. Rotate the CHANNEL knob to select desired screen
“
NORMAL
”, “
AIS
”, “
COMPASS
”, or “
WAYPOINT
”.
5. Press the [ SELECT
] soft key to store the selected
setting.
6. Press the [ QUIT
] soft key several times to return to
radio operation.
“ NORMAL ” D
ISPLAY
“ COMPASS ” D
ISPLAY
“ AIS ” D
ISPLAY
“ WAYPOINT ” D
ISPLAY
NOTE
To show Position information, show AIS targets and use the Compass
display:
GX2100E - external GPS must be connected.
GX2000E - external AIS receiver or transponder and a external GPS
must be connected.