Standard Horizon ECLIPSE, Owner'S Manual

Page: 32 / 98

30
9.10.2 Programming Scan Memory
1. [
]

“ SETUP ”

“ CHANNEL SETUP ”

“ SCAN MEMORY ”
2. Press the [▲] or [▼] key to select a desired
channel to be scanned, then press the [ MEM ]
soft key. The “ MEM ” icon appears on the display,
which indicates the channel has been selected to
the scan channel.
BACK MEM
SCAN MEMORY
CH: 16
CH: 17
CH: 1018
CH: 1019
MEM
MEM
MEM
3. Repeat step 2 for all the desired channels to be
scanned.
4. To delete a channel from the list, select the channel
then press the [
MEM
] soft key again. The “
MEM
”
icon disappears from the display.
5. Press the [ CLR ] key to return to radio operation.
9.10.3 Memory Scanning (M-SCAN)
1. Set the scan type to “ MEMORY SCAN ” in the SETUP menu (refer to “ 9.10.1
Selecting the Scan Type ”).
2. Adjust the SQL knob until background noise disappears.
3. Press one of the soft keys.
4. Press the [◄] or [►] key repeatedly, until the
[ P-SET ] soft key display, then press the [ SCAN ]
soft key. The “ M-SCN ” icon appears on the LCD.
Scanning will proceed from the lowest to the
highest programmed channel number and will stop
on a channel when a transmission is received.
BUSY M
P-SET
M-SCN USA
25W
P
16
5. The channel number will blink during reception.
6. To stop scanning, press the [
16/S
] key or press one of the soft keys, then
press the [ SCAN ] soft key.