ASSEMBLY INSTRUCTIONS
STEP 1
Unfold the
FRONT SUPPORT(2)
from the
MAIN FRAME(1)
and lock in position with the
LOCKING
PIN(25).
Attach the
STABILIZER(3),
the one with the
CAUTION LABEL(28),
to the
MAIN FRAME(1)
by inserting the
MOUNTING INSERT(4)
into the
MAIN FRAME(1)
and secure with
ROUND HEAD
SCREWS(M4x15mm)(20).
Tighten the two
BUTTON HEAD BOLTS(M6x1x45mm)(21)
under the
STABILIZER(3).
STEP 2
Attach the
STABILIZER(3)
to the
FRONT SUPPORT(2)
by inserting the
MOUNTING INSERT(4)
into
the
FRONT SUPPORT(2)
and secure with
ROUND HEAD SCREWS(M4x15mm)(20).
Tighten the two
BUTTON HEAD BOLTS(M6x1x45mm)(21)
under the
STABILIZER(3).
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at [email protected], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Summary of Contents for Wirk Orbit
Page 16: ...16...
Page 18: ...PRODUCT PARTS DRAWING BACK FRONT 18...
Page 20: ...20 NOTES...
Page 21: ...21 NOTES...
