OPERATIONAL INSTRUCTIONS
11
Attach the
PUSH-THRU BAR(26)
to one of the adjustment holes in the
UPRIGHTS(7, 9)
with two
LOCKING PINS(30).
Attach the
SECURING STRAP(32)
to the
EYEBOLT(23)
on the top of the
TOP BEAM(22).
For some
exercises, the
PUSH-THRU BAR(26)
should be up and secured in position with the
SECURING STRAP
(32).
The
PUSH-THRU BAR(26)
can be used as a footbar for some
exercises.
Attach the
PUSH-THRU BAR(26)
to the lowest adjustment holes in the
UPRIGHTS(7, 9)
with two
LOCKING PINS(30).
Lock the
PUSH-
THRU BAR(26)
and
UPRIGHTS(7, 9)
together with two
LOCKING PINS(30).
NOTE:
a.
b.
c.
d.
There are three adjustment holes in the
LEFT
and
RIGHT UPRIGHTS(7, 9)
that allow you to
attach the
PUSH-THRU BAR(26)
at one of three different heights.
Refer to the inset drawing. Push down the button on the "T" end of the
LOCKING PIN(30)
to
release the steel ball on the other end of the pin. Then you can insert the
LOCKING PIN(30)
into
the adjustment hole. Push the button to remove the pin.
Always make sure
SAFETY STRAP(37)
is connected when the
PUSH-THRU BAR(26)
is in use.
Always use
SECURING STRAP(32)
to keep the
PUSH-THRU BAR(26)
in a secure position
when not in use.
Button
SET-UP FOR THE PUSH-THRU BAR
1.
2.
3.
This bar can be used
as a footbar.
