ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520
or e-mail us at:
STEP 1:
Note the correct position of the holes and loops on the
LEFT UPRIGHT(7)
and
RIGHT UPRIGHT(9)
in the illustration above. The holes face away from the
BASE CUSHION(4)
and the loops face to the outside.
Attach the
LEFT UPRIGHT(7)
and the
RIGHT UPRIGHT(9)
to the
BASE FRAME(3)
by inserting the
BUTTON
HEAD BOLTS(M8x1.25x70mm)(50)
and
ARC WASHERS(M8)(61)
from top, and secure with
WASHERS(M8)
(59)
and
NYLOCK NUTS(M8x1.25)(56)
from bottom. Do not tighten the bolts until
STEP 5.
STEP 2:
Note the correct position of the loops on the
LEFT SLIDER(8)
and
RIGHT SLIDER(10)
in the
illustration above. The loops face to the outside.
Pull the
SPRING PIN(12)
then slide the
RIGHT SLIDER(10)
onto the
RIGHT UPRIGHT(9).
Release the
SPRING PIN(12)
so it catches in one of the adjustment holes and locks the
RIGHT SLIDER(10)
in place.
Repeat with the
LEFT SLIDER(8)
and
LEFT UPRIGHT(7).
Position the
LEFT
and
RIGHT SLIDERS(8,10)
so they are the same distance from the top of the
LEFT
and
RIGHT UPRIGHTS(7,9).
Loop
Loop
